Application information 
As the Fiber-Cut drill cuts into the Kevlar, the volume of material to be removed passes into the hollow cutter head and exit channel. The residue escapes out of the drill cut-away and comes out as crumbled pieces, similar to miniature popcorn.

Clean entry, no fibers or delamination

No fibers on-size hole is sharp and clean.

Fiber-Cut drill runs cool, fibers are cut complete as drill continues to penetrate. Kevlar drilling residue passes through hollow exit channel of the Fiber-Cut drill.



Return to Table of Contents

International Carbide Corporation
Last Update September 15, 2010